Conductio’s elements are easy to install and a smooth gliding surface can be achieved because of the sturdy safety plate.The plastic elements for the landing area can be installed on concrete or a wooden substructure or on a natural slope.If needed we will come onsite to advise/assist with installation.
The elements are attached to the neting so that they are also connected to each other. This increases safety, as the elements won’t separate from each other. The elements are made using the compression method. This production method keeps the fibers tightly on the base and keeps them from coming apart. The elements are very sturdy. A stable landing area can thus be achieved even if the original substucture is uneven. A 20 mm thick foam matting is placed on top of the substructure. The fastening net (Tensar LA 30), with a mesh size of 65x65, is placed on top of the foam mat. The foam mat and the net are connected to the substructure with galvanized perforated steel band and anchor bolts or screws. The elements are then attached to the netting with cable ties.We will assist with designing the plastic matting, the substructure and the sprinkling system.